Company News and Updates: |
|
|
| |
|
| |
| Ritron Callbox - 7 Series |
|
|
|
|
Put Ritron communication tools to work for you! Add an OutPost Callbox to any area where communication is a must, but a portable radio just won't cut it. The 7 Series Ritron OutPost Callbox provides long range 2-way voice communication from a fixed location to portable, mobile, stationary base station radios, or through radio repeaters. Along with the features of the 1 and 6 Series Callboxes the 7 Series incorporates a voice chip that enables you to record and playback a greeting message as well as a location identification message to any recieving radios. Without costly trenching or monthly fees, add the security, convenience and productivity benefits of the 6 Series OutPost Callbox. It can be DC battery or AC powered, utilizing Ritron's external power options. The 7 Series Ritron OutPost Callbox is available in both Basic and XT (extra tough) enclosures.
|
|
Added Features:
(In addition to features of the 1 Series and 6 Series Callbox)
Talking Callbox Features
Programmable voice recording capability
Voice message greeting at Callbox
Voice "Callbox Location ID" sent to other radios
Low battery/AC power fail "Voice Alert ID"
Voice alert with sensor input status change
Encode DTMF ANI or SELCAL ANI with PTT
Sensor Activation
5 or 7 tone PTT Encode ANI
Standard Callbox Features:
Simple 2-Way Communications
Available in both, VHF and UHF
Wide or Narrow Band Frequency Compatible
Basic and XT feature weather-resistant housings
Battery Powered (6 D Cell)
External Power Optional - See Accessories
Field or PC Programmable (See Accessories for Software)
Adjustable Power Output (UHF only)
Adjustable Speaker Volume
Low Battery Alert
External Power Fail Alert
Call Tone
XT Model Features
-Fiberglass Hi-Vis Yellow Enclosure
-Stainless Steel Faceplate
-Tamper-Resistant Fasteners
-Internal Antenna
-Grill Guard to protect vandalism to speaker
27 VHF/77 UHF Field Programmable Frequencies
|
|
|
| Model No.: |
RQX-157/157-XT |
RQX-457/457-XT |
| Max. Freq. Separation: |
15 MHz |
|
20 MHz |
|
| RF Channels: |
1 Channel with Independent TX/RX frequencies. |
| Synthesizer Step Size: |
5 kHz |
|
12.5 kHz |
|
| Frequency Stability: |
+/-2.5 PPM (-30 to +60 C) TX/RX |
+/-1.5 PPM (-30 to +60 C) TX/RX |
| Tone/Code Signaling: |
CTCSS (Quiet Call), Digital Coded Squelch (Digital Quiet Call),2-Tone Paging Decode, DTMF ANI Encode, 5- or 7-Tone Paging Decode, "SELCAL" |
|
| Dimensions: |
Basic 7.0"H x 5.0"W x 3.0"D |
|
|
XT 11.5"H x 9.5"W x 4.0"D |
|
| Weight: |
Basic 3 lb. 12 oz. with antenna and 6 D-cell batteries |
|
XT 9 lb. 10 oz. with antenna and 6 D-cell batteries |
| Enclosure Material: |
O-Ring sealed valox, thermo-plastic. Reinforced fiberglass (XT) |
| Environmental: |
Splash resistant, shock and vibration per RITRON Test |
| RJ11 Telephone Jack: |
Internal RJ11 jack is used for PC programming. |
| Antenna Fitting: |
BNC |
| |
|
|
|
|
|
|
|
|
|
Wide Mode |
Narrow Mode |
Wide Mode |
Narrow Mode |
| Modulation Acceptance: |
+/- 5.0 kHz |
+/- 3.75 kHz |
+/- 5.0 kHz |
+/- 3.75 kHz |
Sensitivity:
(12 dB SINAD) |
0.20 μV |
0.20 μV |
0.22 μV |
0.20 μV |
Noise Squelch
Sensitivity: |
Programmable per channel, factory set for 12 dB SINAD |
| Frequency Response: |
300 - 3000 Hz, de-emphasized |
|
| Audio Output |
1 Watt into 8 W, with less than 5 % THD @ the earphone jack |
|
|
|
|
|
|
|
Wide Mode |
Narrow Mode |
Wide Mode |
Narrow Mode |
| Emission Designator: |
16K0F3E |
11K0F3E |
16K0F3E |
11K0F3E |
| Deviation: |
+/- 5.00 KHz |
+/- 2.50 KHz |
+/- 5.00 KHz |
+/- 2.50 KHz |
| RF Power Output: |
1.0 Watts maximum @ +13 VDC |
2.0 Watts maximum @ +13 VDC |
| Time-out Timer: |
60 seconds, programmable |
|
|
|
|
|
|
|
| Standby: |
85 mA |
|
75 mA |
|
| Sleep: |
25 mA |
|
25 mA |
|
Avg.Standby
w/Power Saver: |
30 mA |
|
30 mA |
|
| Receive: |
230 mA |
|
250 mA |
|
| Transmit: |
550 mA @ 1.0 Watts |
475 mA @ 2.0 Watts |
|
|
|
75 mA @ 1.0 Watts |
|
|
|
|
|
| Power Supply: |
Internal (6) "D" Cell Battery Holder and Internal screw terminal connectors for external 12 VDC supply |
|
|
|
|
| 6 D-Cell Batteries: |
Alkaline |
NiCD |
|
|
| Capacity: |
14,000 mAH |
5,000 mAH |
|
|
| Transmissions: |
7,000 |
2,500 |
|
|
| Duty Cycle: |
3 Second RX, 3 Second TX, 10 Second Standby |
|
|
|
|
|
|
|
The Ritron 7 Series Callbox can used as a part of following systems...
SiteCall
ClubCall
GateGuard
|
|
| 7 Series Callbox Accessories (Basic and XT Enclosure): |
| AFB-1545 |
|
Replacement BNC Antenna |
| RAM-1545 |
|
Dual-Band VHF/UHF magnet-mount antenna w/ 20ft. RG-58 coax/BNC |
| RAM-1545 |
|
Dual-Band VHF/UHF magnet-mount antenna w/ 20ft. RG-58 coax/BNC |
| RAM-45 |
|
UHF 1/4 wave whip magnet-mount antenna w/12ft. RG-58 coax/PL-259 |
| R-STROBE |
|
Blue Strobe Light, 120 VAC, 1 Amp |
| RSS-100 |
|
Solar Power System - Includes: |
| GGT-1 |
|
DTMF Decoder Board, Factory Install (Field Installation Kit available - GGT-1F) |
| RQE-2 |
|
MDC1200 ANI or G-Star Board Installed |
| RPT-PCPK-10.1 |
|
7 Series Callbox Programming Kit |
| RPT-PCPS-10.1 |
|
7 Series Callbox Programming Software |
| 25107400 |
|
T-25 Tamper Resistant Torx Bit |
| 2147C002 |
|
9-Pin to USB Adapter |
Basic Enclosure Accessories:
|
| RK-RQXMB |
|
Mounting Brackets for Basic Enclosure Callbox |
| RPS-EXPO-PLUS |
|
External Power kit for the 7 Series Basic Enclosure Callbox |
| 14280012 |
|
Replacement Placard for Basic Enclosure Callbox |
XT Enclosure Accessories:
|
| RQX-XTMK |
|
Mounting Plate for XT Enclosure Callbox |
| RQX-XTMK-GN |
|
Gooseneck Pedestal Mounting Plate for XT Enclosure Callbox |
| RPS-EXPO |
|
External Power kit for the 7 Series XT Enclosure Callbox |
|
|
|
|