The new Liberty Repeater is the perfect wireless solution for on-site communication needs. Industrial plants, schools, retail stores, golf courses, and other "tough-to-cover" applications no longer need to suffer from the range and coverage limitations common to all brands of portable two-way radios.

The Liberty repeater provides rock solid communication from one radio to another... virtually eliminating shadowing, fading, and dead spots.

Rugged and compact, the Liberty repeater is a completely integrated wireless solution. The Liberty an integrated, full-duplex, PC programmable on-site repeater.

Its all-metal, powder coated, extruded aluminum housing provides durability and protection for the electronics and duplexer, while built-in mounting flanges make the Liberty easy to install.

• Integrated Full Duplex Repeater with Duplexer
• Frequency Range: 450-470 MHz (400-430 MHz available soon)
• Narrow or Wide Bandwidth Versions Available
• 2 Watt Output at Antenna Port
• Compact Size: 2.125" X 8.0" X 5.75"
• 100% Duty Cycle
• Available in either 25 kHz or 12.5 kHz bandwidth
• PC Programmable, require RPT-PCPK 5.0 kit
• Built-in CTCSS, DCS, or Custom CTCSS (60-254 Hz) Signalling
• 12 VDC or 110/220 VAC operation
• LED Indicators: Power On and Transmit
• Morse Code ID'r, TX TOT, TX Hang Timer
• Remote Speaker Microphone RJ-12 Jack for Local TX and RX Control
• Features "N" Type Antenna Connector
• All Metal Extruded Aluminum Housing
• Built-in Mounting Flanges for Easy Installation
• 1 Year Warranty

	WIDE BAND 25 kHz	NARROW BAND 12.5 kHz
Models:	RLR-460	RLR-460
FCC ID:	Pending	Pending
FCC Parts:	Pending	Pending
Dimensions:	2.125H x 8.0" W x 5.75" D	2.125H x 8.0" W x 5.75" D
Weight:	3.5 lbs.	3.5 lbs.
Emission Designators:	16K0F3E	11K2F3E
Operating Frequency Range:	450-470 MHz	450-470 MHz
Frequency Separation:	TX/RX: 5.0 MHz	TX/RX: 5.0 MHz
RF Channels:	(1) TX/RX Channel	(1) TX/RX Channel
Synthesized Steps:	12.5 kHz	12.5 kHz
Tone/Code Signalling:	QC (Quiet Call) or	QC (Quiet Call) or
	DQC (Digital Quiet Call) mode	DQC (Digital Quiet Call) mode
Power Requirements:	12 VDC nominal @ 1A min.	12 VDC nominal @ 1A min.
Local Audio Output:	1/ 2 Watt into 8 Ohms	1/2 Watt into 8 Ohms
Hang-Time Timer:	0 to 8 seconds, programmable	0 to 8 seconds, programmable
Squelch Tail Eliminator Timer:	0 to 8 seconds, programmable	0 to 8 seconds, programmable
Time-out Timer:	0 to 30 minutes, programmable	0 to 30 minutes, programmable
RF Connector:	"N" Type	"N" Type
DC Power Connector:	P-5 (2.1mm* 5.51mm*9.5 mm)	P-5 (2.1 mm X 5.51mm X 9.5 mm)
Antenna Impedance:	50 Ohms	50 Ohms
Test Speaker Microphone:	RJ-12	RJ-12
TRANSMITTER
RF Output @ antenna port:	2 Watt	2 Watt
Frequency Stability:	+/- 1.5 PPM (-300 C to +500 C)	+/- 1.5 PPM (-300 C to +500 C)
Modulation:	Direct FM	Direct FM
Deviation:	0 to +/- 5 kHz, adjustable	0 to +/- 2.5 kHz, adjustable
Spurious & Harmonics:	< -36 dBm	< -36 dBm
Audio Response:	10 to 2500 Hz (+/- 3 dB)	10 to 2500 Hz (+/- 3 dB)
FM Hum & Noise:	-50 dB	-45 dB
Duty Cycle:	100%	100%
RECEIVER
Receiving System:	Fixed Tuned, Dual Conversion	Fixed Tuned, Dual Conversion
	Superheterodyne	Superheterodyne
IF System:	43.65 MHz/450 kHz	43.65 MHz/450 kHz
Local Oscillator:	Low Side Injection	Low Side Injection
Sensitivity (12 dB SINAD):	0.28 uV through duplexer	0.28 uV through duplexer
Selectivity (EIA):	-75 dB @ +/- 25 kHz	-65 dB @ +/- 12.5 kHz
Spurious Rejection (EIA):	-75 dB	-75 dB
Image Rejection (EIA):	-80 dB	-80 dB
Intermodulation Rejection (EIA):	-70 dB	-70 dB
Frequency Stability:	+/-1.5 PPM (-300C to +500C)	+/-1.5 PPM (-300C to +500C)
Noise Squelch Sensitivity:	8-18 dB SINAD, adjustable -	8-18 dB SINAD, adjustable -
	factory set to open @ 12 dB	factory set to open @ 12 dB
Audio Frequency:	10 Hz to 3 kHz	10 Hz to 3 kHz

The Ritron Callbox goes with the following systems...

Click on the system to go to the system page.