The Ritron QuickTalk RQT is an industrial-grade, radio transmitter with switch inputs and voice storage capability. It is compatible with virtually any other business-band 2-way radio, the radio can even be programmed to operate with radio repeaters.

Connect virtually any type of switch or sensor (up to 4) to the RQT switch input(s), and record a unique voice message for each of the 4 switches. When any of the switches change state your pre-recorded voice message will instantly be transmitted to all radio-equipped personnel. Each input can be programmed to transmit on a different frequency. For extended range use the optional RAM-1545 antenna. The RQT radio even works with radio repeaters.

The gasketed and sealed, polycarbonate enclosure offers built-in mounting flanges. The RQT radio can operate stand-alone on 6 AA batteries. It can also be powered externally by an optional 110V AC adaptor (# RPX-Expo).

The RQT is available with a 2Watt transmitter or a 120mWatt transmitter.

RQT Range/Coverage Estimates:
120mWatt model - ¼ mile line-of-sight, no obstructions or 100,000sq. ft*.
2 Watt model - 1 mile line-of-sight, no obstructions or 200,000 sq ft.*
*Range depends on building structure and topography.

Available frequency bands are:
VHF frequency band (150-165MHz)
VHF License-Free MURS (5 pre-selected MURS)
UHF frequency band (450-470MHz)

The Quick Talk will operate for approximately 7,000 transmissions when operating on batteries. Sample duty cycle of 1 transmission (5 seconds in length) per hour, 24 hours per day, 5 days per week. Fewer transmissions will extend battery life.

KEYFOB Activation Feature
The standard QuickTalk transmitter can be factory ordered with a special KEYFOB receiver installed. A QuickTalk equipped with the special KEYFOB receiver can now discretely activate any of the QuickTalk's switch inputs using a companion KEYFOB. Once activated, the will transmit the appropriate voice message to all radio-equipped personnel.

KEYFOB Range/Coverage Estimates:
KEYFOB transmitter to a QuickTalk equipped with special KEYFOB receiver - Approximately 200 feet*
*Range depends on building structure and topography.
See above for the RQT range/coverage distances.

Ritron PC programming software CD and USB cable permits custom programming of all RQT attributes.

The QuickTalk is designed, engineered and manufactured in the USA by Ritron, Inc.

For features of the RQT, call us at 1-800-872-1872.

	Narrowband Only	Narrowband Only	MURS License-free
			Narrow and Wide Band
Models	RQT-451 (UHF)	RQT-151 (VHF)	RQT-151M (VHF)
FCC ID:	AIERIT32-451	AIERIT32-151	AIERIT32-151M
FCC Rule Parts:	90	90	95J
Frequency Range:	450 to 470 MHz	150 to 165 MHz	150 to 165 MHz
			(7) MURS frequencies only
No. of Channels:	4	4	4
Synthesizer Step Size:	6.25 kHz	2.5 kHz	2.5 kHz
Frequency Stability
(-30° to +60° C):	±2.5 PPM	±1.5 PPM	±1.5 PPM
Emission Designators:	11K0F3E	11K0F3E	11K0F3E narrow
			16K0F3E wide
Deviation:	±2.50 kHz	±2.50 khz	±2.50 kHz narrow
			±5.0 kHz wide
FM Hum and Noise:	-35 dB	-40 dB	-40 dB narrow
			-46 dB wide
Audio Distortion:	< 6 %	< 6 %	< 6 % narrow
			< 3 % wide
RF Power Output:	120 mW	120 mW	120 mW
	2 Watt Model Pennding	2 Watt Model Pennding	----------

	All Models
Coded Signaling Encode:	CTCSS, Quiet Call, 51 Tones
	DCS, Digital Quiet Call, all codes
	DTMF ANI
	3-7 tone Selcall
Typical Range:	One half mile to a handheld radio transceiver using the
	standard flexible antenna. Greater range is possible if optional
	antenna (RAM-1545), or a radio repeater is used.
Battery Life:	1 year when using AA Alkaline batteries and the unit transmits
	a 5 second message once each hour, 24 hours per day, 5 days
	per week or approximately 7,000 transmissions.
Internal Battery:	6 AA Alkaline batteries.
External Power:	12-18 VDC, Use Ritron p/n# RPS-EXPO
Antenna Connector:	BNC, 50 Ohms, front panel mounted
Antenna:	Ritrob AFB-1545 Standard Antenna, Flexible Whip,
	14 inches long with elbow connector.
Housing:	Polycarbonate
Dimensions:	7.57” x 5.07” x 2.65”(19.23cm x 12.88cm x 6.73cm)
Weight:	1 pound, without batteries and antenna
Number of Switch Inputs:	4 Momentary, Latching, Analog Voltage or Resistance
Voice Message Length:	24 seconds total for all voice messages, equally allocated to
	the programmed inputs
Auxiliary Messages:	Low Battery (2 seconds)
(Fixed Time)	External Power Failure (2 seconds)
	Location (2 seconds) One location message per RQT. Precedes voice
	message for each input.
Programming Method	User Programmable with Ritron RQA/RQT PC Programmer via USB
Programmable Features	- 4 independently programmed inputs
	- Analog or digital input operation
	- Event driven and/or scheduled transmission of input status
	- Compressed transmitted audio (compatible with companded radios)
	- Preamble alert tone prior to transmitter voice message
	(selectable On/Off)
	- Unique, user recorded voice messages
	- Voice message recording via on-board microphone or
	pre-recorded .wav file
	External power failure and low battery alert

The Ritron Callbox goes with the following systems...

Click on the system to go to the system page.