| Model: |
RQT-150 VHF (150-162 MHz) |
| Typical Range: |
RQT-450 UHF (450-470 MHz) |
|
Using standard antenna supplied |
|
with RQT; 1/2-mile to a portable radio line-of-sight. |
|
1-mile to the Ritron base |
|
station line-of-sight. Increased range |
|
is possible using a gain antenna on the |
|
RQT or a radio repeater. |
| Battery Life: |
1 year when using AA Alkaline batteries or |
|
7,000 transmissions. |
Antenna
Connector: |
BNC, 50 Ohms |
| Enclosure: |
GE-Noryl, Grey, Ultraviolet Stable, NEMA-4-4X |
|
Water Resistant with 4 Mounting Ears. |
| Dimensions: |
5.25 X 5.25" X 2.5" |
| Weight: |
1 lb less batteries and antenna. |
| Switch Inputs: |
2 Momentary, Latching, Analog, or Resistance. |
Coded Signalling
Encoder: |
CTCSS, Quiet Call, 51 Tones DCS,
Digital Quiet Call, all codes. |
Jumper
Selectable
Features: |
Wide (25 kHz or Narrow (12.5 kHz) band deviation |
|
Non-Compressed or Compressed Transmit Audio |
|
(for use with radios using companded" technology) |
| Message Length: |
8 seconds per switch condition when 1 switch input used. |
|
3.25 seconds per switch condition when 2 switch inputs |
|
are used. Plus a 3.25 second location message. |
Auxiliary
Messages: |
Low Battery Alert (1.5 seconds). |
|
External Power Failure (1.5 Seconds). |
Message
Scheduling: |
User programmable intervals and repeat times. |
Programming
Method: |
User programmable with a standard pulse dial telephone. |
|
Note: Special office telephones, speaker telephones, and |
|
telephones with lighted dials cannot be used to program |
|
the Quick Talk. |