|
|
|
|
Each D-Series radio can be tailored precisely for the user's specific needs. For example: each D-Series radio can be programmed to display as few as 1 channel or as many as 10. Features like channel scan, weather scan and weather alert can be turned on or off depending on the need. The SST D-Series radios are powerful and feature rich, yet flexible and cost-effective.
Lightweight, small and easy to carry, yet capable of withstanding a 6 foot drop onto concrete. In fact, ounce for ounce, the Patriot D-Series radios are tougher than any other professional business radio in its class.
Ritron's PATRIOT products are put to task daily in tough worksite environments. Built to rigorous standards for design, manufacturing, and engineering, these products are your solution for effective wireless radio communications. The PATRIOT radio line stands out from the competition.
|
|
VHF and UHF Models
• Small, Rugged and Lightweight
• High Visibility, Easy-To-Read LED Channel Display
• Up To 10 Channel Capacity
• Built-In Signaling:
- 2-Tone Paging Decode per channel
- CTCSS and Digital Coded Squelch per channel
• Channel Scan - Normal and/or Priority
• NOAA Weather Channel Feature (VHF only)
• NOAA Weather Alert Feature (VHF only)
• PC programmable with optional Windows® based software (vs. 9.0)
• Narrow or Wide Band Selectable*TX only
• Busy Channel Lock-Out
• High/Low Power Selectable
• 2-tone Decode Paging allows the D-Series radios to function both as a compact two-way radio and a pager. The radio can be programmed to "listen" for specific paging tones and alert the user with a distinct ring as well as visual indication via the bright LED display.
• Battery Life up to 11.9 Hours
|
|
| Model No: |
SST-144D |
| FCC ID: |
AIERIT13-144 |
| FCC Rule Parts: |
22, 74, 90, 95 |
| Frequency Range: |
150-162 MHz |
|
12 MHz |
| RF Channels: |
Up to 10 Channels,
Independent TX/RX frequencies |
| Synthesizer Step Size: |
5 KHz |
| Frequency Stability: |
+/-2.5 PPM (-30 to +60 C) TX/RX |
| Tone/Code Signaling: |
CTCSS (Quiet Call), DCS (Digital Quiet Call), |
|
2-Tone Sequential Decode,
280 to 2500 Hz, 0.25 to 8.0 sec |
Power Supply
(rechargeable): |
+7.2 VDC, 800 mAH NiCd standard |
|
+7.2 VDC, 1500 mAH NIMH optional |
| Battery Drain |
|
| Standby: |
57 mA |
| Sleep: |
21 mA |
Avg. Standby
w/ Power Saver: |
23 mA |
| Receive: |
130 mA |
| Transmit: |
1600 mA @ 4 Watt |
|
850 mA @ 1 Watt |
Battery Life @ 90/5/5
Duty Cycle w/ Std. battery |
|
| pack (800 mAH): |
7.4 Hrs, Battery Saver On, TX High Power |
|
11.5 Hrs, Battery Saver On, TX Low Power |
|
5.6 Hrs, Battery Saver Off, TX High Power |
|
7.8 Hrs, Battery Saver Off, TX Low Power |
Battery Life @ 90/5/5 Duty
Cycle w/ High capacity |
|
| battery pack (1500 mAH): |
14.0 Hrs, Battery Saver On, TX High Power |
|
21.7 Hrs, Battery Saver On, TX Low Power |
|
10.7 Hrs, Battery Saver Off, TX High Power |
|
14.7 Hrs, Battery Saver Off, TX Low Power |
| Dimensions: |
4.75H x 2.2"W x 1.43"D " |
| Weight: |
11.5 oz. with battery pack |
| Enclosure Material: |
Lexan Polycarbonate |
| Antenna Fitting: |
1/4”- 32 x 1/4” threaded |
| Earphone Jack: |
3.5 mm, disconnects the internal speaker for |
|
external earphone, speaker/microphone,
or headset. Also cable connection for |
|
PC programming. |
| Microphone/PTT/Chg Jack: |
2.5 mm, for external speaker/microphone, |
|
headset or RITRON model BC-A wall charger. |
| TRANSMITTER |
|
| RF Power Output: |
Programmable per channel for high/low power |
| High: |
4 Watt @ +7.2 VDC |
| Low: |
1 Watt |
|
Wide Mode |
Narrow Mode |
| Emission Designator: |
16KOF3E |
11KOF3E |
| Deviation: |
+/- 5.00 kHz |
+/- 2.50 kHz |
| FM Hum and Noise: |
-46 dB |
-40 dB |
| Audio Distortion: |
< 3% |
< 6 % |
| Spurious & Harmonics: |
-60 dBc |
| Audio Response: |
Meets FCC and EIA requirements |
| Time-out Timer: |
60 seconds, programmable |
| RECEIVER |
|
|
Wide band |
Narrow band
(SST-144D-N only) |
| Modulation Acceptance: |
+/- 7.0 kHz |
+/- 3.75 kHz |
| Sensitivity: (12 dB SINAD) |
< 0.25 uV |
< 0.25 uV |
| Adjacent Channel (EIA): |
-70 dB |
-60 dB |
| Spurious Rejection: |
-70 dB |
-70 dB |
| Image Rejection (EIA): |
-70 dB |
-70 dB |
| lntermodulation (EIA): |
-65 dB |
-60 dB |
| Noise Squelch Sensitivity: |
Programmable per channel,
factory set for 12 dB SINAD |
| Frequency Response: |
300 - 3000 Hz, de-emphasized |
| Audio Output Receiving: |
1 Watt into 8 ohms, with less than 5% THD |
|
@ the earphone jack |
| System: |
Dual conversion superheterodyne |
| I. F. System: |
1st - 43.65 MHz, 2nd - 450 kHz |
| L.O. Injection: |
High side |
| Model No: |
SST-444D |
| FCC ID: |
AIERIT13-450 |
| FCC Rule Parts: |
22, 74, 90, 95 (A), 90.210 |
| Frequency Range: |
450-470 MHz |
|
20 MHz |
| RF Channels: |
Up to 10 Channels, Independent TX/RX
frequencies |
| Synthesizer Step Size: |
12.5 kHz |
| Frequency Stability: |
+/-2.5 PPM (-30 to +60 C) TX/RX |
| Tone/Code Signaling: |
CTCSS (Quiet Call),DCS (Digital Quiet Call), |
|
2-Tone Sequential Decode,
280 to 2500 Hz, 0.25 to 8.0 sec |
Power Supply
(rechargeable): |
+7.2 VDC, 800 mAH NiCd standard |
|
+7.2 VDC, 1500 mAH NiMH optional |
| Battery Drain |
|
| Standby: |
55 mA |
| Sleep: |
18 mA |
Avg. Standby
w/ Power Saver: |
21.5 mA |
| Receive: |
120 mA |
| Transmit: |
1400 mA @ 3 Watt |
|
850 mA @ 1.5 Watt |
Battery Life @ 90/5/5
Duty Cycle w/ Std. battery |
|
| pack (800 mAH): |
8.3 Hrs, Battery Saver On, TX High Power |
|
11.5 Hrs, Battery Saver On, TX Low Power |
|
6.2 Hrs, Battery Saver Off, TX High Power |
|
7.9 Hrs, Battery Saver Off, TX Low Power |
Battery Life @ 90/5/5 Duty
Cycle w/ High capacity |
|
| battery pack (1500 mAH): |
15.5 Hrs, Battery Saver On, TX High Power |
|
21.6 Hrs, Battery Saver On, TX Low Power |
|
11.6 Hrs, Battery Saver Off, TX High Power |
|
14.8 Hrs, Battery Saver Off, TX Low Power |
| Dimensions: |
4.75H x 2.2"W x 1.43"D " |
| Weight: |
11.5 oz. with battery pack |
| Enclosure Material: |
Lexan Polycarbonate |
| Antenna Fitting: |
1/4” - 32 x 1/4” threaded |
| Earphone Jack: |
3.5 mm, disconnects the internal speaker for |
|
external earphone, speaker / microphone,
or headset. Also provides cable connection |
|
for
PC programming. |
| Microphone/PTT/Chg Jack: |
2.5 mm, for external speaker/microphone, |
|
headset or RITRON model BC-A wall charger. |
| TRANSMITTER |
|
| RF Power Output: |
Programmable per channel for high or low power |
| High: |
3 Watts @ +7.2 VDC |
| Low: |
1.5 Watt |
|
Wide Mode |
Narrow Mode |
| Emission Designator: |
16KOF3E |
11KOF3E |
| Deviation: |
+/- 5.00 kHz |
+/- 2.50 kHz |
| FM Hum and Noise: |
-40 dB |
-37 dB |
| Audio Distortion: |
< 2% |
< 6% |
| Spurious & Harmonics: |
-55 dBc |
| Audio Response: |
Meets FCC and EIA requirements |
| Time-out Timer: |
60 seconds, programmable |
| RECEIVER |
|
|
Wide band |
Narrow band |
| Modulation Acceptance: |
+/- 7.0 kHz |
+/- 3.75 kHz |
| Sensitivity: (12 dB SINAD) |
< 0.25 uV |
< 0.25 uV |
| Adjacent Channel (EIA): |
-60 dB |
-50 dB |
| Spurious Rejection: |
-65 dB |
-60 dB |
| Image Rejection (EIA): |
-65 dB |
-65 dB |
| lntermodulation (EIA): |
-65 dB |
-65 dB |
| Noise Squelch Sensitivity: |
Programmable per channel,
factory set for 12 dB SINAD
|
| Frequency Response: |
300 - 3000 Hz, de-emphasized |
| Audio Output Receiving: |
1 Watt into 8 ohms, with less than 5% THD |
|
@ the earphone jack |
| System: |
Dual conversion superheterodyne |
| I. F. System: |
1st - 43.65 MHz, 2nd - 450 kHz |
| L.O. Injection: |
Low Side |
| Model No: |
SST-446D |
| FCC ID: |
AIERIT13-442 |
| FCC Rule Parts: |
90, 90.210 |
| Frequency Range: |
450-470 MHz |
|
20 MHz |
| RF Channels: |
Up to 10 Channels, lndependent
TX/RX frequencies |
| Synthesizer Step Size: |
12.5 KHz |
| Frequency Stability: |
+/-2.5 PPM (-30 to +60 C) TX/RX |
| Tone/Code Signaling: |
CTCSS (Quiet Call), DCS (Digital Quiet Call),
|
|
2-Tone Sequential Decode,
280 to 2500 Hz, 0.25 to 8.0 sec |
Power Supply
(rechargeable): |
+7.2 VDC, 800 mAH NiCd standard |
|
+7.2 VDC, 1500 mAH NiMH optional |
| Battery Drain |
|
| Standby: |
55 mA |
| Sleep: |
18 mA |
Avg. Standby
w/ Power Saver: |
21.5 mA |
| Receive: |
120 mA |
| Transmit: |
800 mA @ 2 Watt |
|
|
Battery Life @ 90/5/5
Duty Cycle w/ Std. battery |
|
| pack (800 mAH): |
12.0 Hrs, Battery Saver On |
|
8.1 Hrs, Battery Saver Off |
|
|
|
|
Battery Life @ 90/5/5 Duty
Cycle w/ High capacity |
|
| battery pack (1500 mAH): |
22.6 Hrs, Battery Saver On |
|
15.2 Hrs, Battery Saver Off |
|
|
|
|
| Dimensions: |
4.75H x 2.2"W x 1.43"D " |
| Weight: |
11.5 oz. with battery pack |
| Enclosure Material: |
Lexan Polycarbonate |
| Antenna Fitting: |
1/4 - 32 x 1/4" threaded " |
| Earphone Jack: |
3.5 mm, disconnects the internal speaker for |
|
external earphone, speaker/microphone,
or headset. Also provides cable connection |
|
for PC programming. |
| Microphone/PTT/Chg Jack: |
2.5 mm, for external speaker/microphone, |
|
headset or RITRON model BC-A wall charger. |
| TRANSMITTER |
|
| RF Power Output: |
|
| High: |
2 Watt @ +7.2 VDC |
| Low: |
|
|
Wide Mode |
Narrow Mode |
| Emission Designator: |
16KOF3E |
11KOF3E |
| Deviation: |
+/- 5.00 kHz |
+/- 2.50 kHz |
| FM Hum and Noise: |
-40 dB |
-37 dB |
| Audio Distortion: |
< 2 % |
< 6 % |
| Spurious & Harmonics: |
-55 dBc |
| Audio Response: |
Meets FCC and EIA requirements |
| Time-out Timer: |
60 seconds, programmable |
| RECEIVER |
|
|
Wide band |
Narrow band |
| Modulation Acceptance: |
+/- 7.0 kHz |
+/- 3.75 kHz |
| Sensitivity: (12 dB SINAD) |
< 0.25 uV |
< 0.25 uV |
| Adjacent Channel (EIA): |
-60 dB |
-50 dB |
| Spurious Rejection: |
-65 dB |
-60 dB |
| Image Rejection (EIA): |
-65 dB |
-65 dB |
| lntermodulation (EIA): |
-65 dB |
-65 dB |
| Noise Squelch Sensitivity: |
Programmable per channel,
factory set for 12 dB SINAD |
| Frequency Response: |
300 - 3000 Hz, de-emphasized |
| Audio Output Receiving: |
1 Watt into 8 ohms, with less than 5% THD |
|
@ the earphone jack |
| System: |
Dual conversion superheterodyne |
| I. F. System: |
1st - 43.65 MHz, 2nd - 450 kHz |
| L.O. Injection: |
Low side |
|
|
The Ritron Callbox goes with the following systems...
Click on the system to go to the system page.
|
|
