|
|
|
|
The Quick Assist Radio transmits user-recordable voice messages over existing radio systems. Ideal for Retail Stores, Hotels/Motels, Delivery or Receiving Docks, Manufacturing Applications (Assembly lines or workstations), Amusement Parks, Golf Courses, Parking Structures/Lots, Gates, or any area where wireless communications is needed.
A simple push-of-a-button immediately transmits a voice message directly and discreetly summoning radio-equipped personnel to a specific location or department. These radios improve customer service and eliminate noisy PA paging.
Since the Quick Assist is completely wireless and battery-operated, it can be installed in a variety of locations, both indoor and outdoor. In addition, a number of operating features are user programmable without requiring specialized software, or even a computer. All you need is a standard telephone.
|
|
Provides prompt customer service 24 hours a day
Keeps your staff connected and your customers satisfied. Your
customers get prompt assistance without having to search for a
staff member. Permits efficient use of store personnel.
Easy installation or relocation to any sales area
The Quick Assist is very compact and quickly mounts on any
surface. It's completely wireless communication (no cables or
wires). It's even weather resistant for outdoor use.
Low cost ownership
No airtime charges to incur. The Quick Assist is a self-contained
radio transmitter. It's compatible with virtually any 2-way radio
system. What's more, it's simple to use and operate by customers
and sales personnel. The Quick Assist has a variety of user
programmable features built-in.
Use the Quick Assist Callbox...
. Cutting stations
. Locked cabinet displays
. Unstaffed and part-time counters or registers
. Question-intensive merchandise areas
. Outdoors departments.Lumber, Nursery, Patio
. Hard to see areas of the store
. Heavy or high merchandise areas
|
|
|
Narrowband Only |
Narrowband Only |
MURS License-free |
|
|
|
Narrow and Wide Band |
| Models |
RQA-451 (UHF) |
RQA-151 (VHF) |
RQA-151M (VHF) |
| FCC Rule Parts: |
90 |
90 |
95J |
| Frequency Range: |
450 to 470 MHz |
150 to 165 MHz |
150 to 165 MHz |
|
|
|
(7) MURS frequencies only |
| RF Power Output: |
120 mW |
120 mW |
120 mW |
|
|
All Models |
| Coded Signaling: |
Encode CTCSS, DCS, DTMF, 3-7 tone SelCall |
| Typical Range/Coverage: |
One-half mile, line-of-sight to a portable 2-way radio, or approximately |
|
75,000 sq. ft. Greater range is possible when a radio repeater is used. |
| Battery Life: |
1 year when using AA Alkaline batteries or approximately 7,000 transmissions |
| Internal Battery: |
6 AA Alkaline batteries. |
| Antenna: |
Internal, tamper-proof, 1/4 wave |
| Housing: |
Gasketed, water-resistant, polycarbonate with UV stabilizer for outdoor use. |
| Dimensions: |
7.57” x 5.07” x 2.1”(19.23cm x 12.88cm x 5.33cm) |
| Weight: |
1 pound, without batteries |
| Switch Input: |
Front-panel,momentary push button |
| Voice Message "Assistance Needed" |
Customizable, 12 seconds max, if Reset Message also used. |
| Voice Message "Reset" |
Optional, Customizable, 12 seconds max |
| Voice Message "Low Battery Alert" |
Customizable - 2 seconds |
| Voice Message "External Power Fail" |
Customizable - 2 seconds |
| Programming Method: |
User Programmable with PC Programmer and USB to 5 Pin Mini USB Cable |
| Programmable Features: |
- TX audio companding (allows compatibility with certain 2-way radios) |
|
- Repeat Transmission Schedules |
|
- Voice message recording via on-board microphone or pre-recorded .wav file |
|
- Front panel TX indicator LED |
|
|
The Ritron Callbox goes with the following systems...
Click on the system to go to the system page.
|
|
