TeleSwitch High Power – Remote Control Radio
Specialty Telemetry Transceivers
High Power with Integrated Remote Control Capability
The TeleSwitchHP is a versatile, purpose-built, high power radio initially designed for use in the railroad industry. The radio transceiver (VHF or UHF band) includes built-in, dual DTMF decoder controlled relays. It can be used as the radio transceiver in a railroad wayside defect detection announcement system. The added remote-controlled relay feature allows the locomotive engineer to initiate “on-demand” the re-broadcast of a recent defect detector announcement message. This feature also allows DTMF remote control of a wide variety of other devices.
The TeleSwitchHP (High-Power) is a 30W (adj. down to 5W), PC programmable transceiver with the added functionality of two built-in DTMF decoder-controlled 1A dry-contact relays. Each relay can be independently controlled by a unique DTMF command consisting of up to 12 characters. Each relay can be programmed to respond as follows: close relay, open relay, or perform a momentary closure. An “Acknowledgment Tone” provides an audible tone whenever a command is correctly decoded by the TeleSwitchHP. The dual-color (red/green) LED i
- High Power Capability 5-30 Watts
- 2 Built-In, DTMF Controlled, 1A Dry-Contact Relay Outputs
- “Decoder Acknowledgment Tone”
- 3 Types of Relay Response: Close, Open, Momentary
- Narrow Band@12.5 kHz (Wide Band @25KHz)*
- NXDN™ Digital, Very Narrow Band@6.25 kHz Coming Soon!
- Broadband TX/RX Design:
- 38 MHz@ VHF, 28 MHz@220 MHz, 20MHz@UHF
- Frequency Ranges:
136 -174 MHz
217-245 MHz***
450-470 MHz*** - Frequency Stability Standard @ 1.0 ppm
- Ultra Fast TX/RX Attack Times
- Controlled Envelopesm TX Keying
- Meets FCC and IC (Canada) Standards ***
- Programmable Output Power
- Dual Color TX/RX LED Indicator
- Internal .5W Audio Amp for Optional Channel Monitoring (spkr required)
- SMD Component Design
- Custom Frequency Ranges Available
- Designed and Manufactured in the USA
* Wideband (25KHz) model available by special order only and where allowed by appropriate regulatory authorities.
** Certain models listed have not been approved by the FCC. This device is not, and may not be offered for sale.
- Ideal for any application where a contact closure is needed to remotely control a switch
- light, turn a pump on/off, activate a siren, etc.
Have Questions?
